Description Ivo Sarak 2004-05-24 07:49:46 UTC Description of problem:The kernel is giving a lot of "hub 1-0:1.0: over-current change onport" messages.Is there somekind of problem?Version-Release number of selected component (if applicable):kernel-2.6.5-1.358How reproducible:Always.Steps to Reproduce:1. Install FC2;2. Start the box up with kernel-2.6.5-1.358; Actual results:...hub 1-0:1.0: over-current change on port 6hub 1-0:1.0: over-current change on port 5hub 1-0:1.0: over-current change on port 6hub 1-0:1.0: over-current change on port 5hub 1-0:1.0: over-current change on port 5hub 1-0:1.0: over-current change on port 6hub 1-0:1.0: over-current change on port 5hub 1-0:1.0: over-current change on port 5hub 1-0:1.0: over-current change on port 5hub 1-0:1.0: over-current change on port 5hub 1-0:1.0: over-current change on port 5hub 1-0:1.0: over-current change on port 5hub 1-0:1.0: over-current change on port 5hub 1-0:1.0: over-current change on port 5hub 1-0:1.0: over-current change on port 5hub 1-0:1.0: over-current change on port 5hub 1-0:1.0: over-current change on port 6hub 1-0:1.0: over-current change on port 5hub 1-0:1.0: over-current change on port 6hub 1-0:1.0: over-current change on port 5hub 1-0:1.0: over-current change on port 5...Expected results:No such messagem, maybe...Additional info: Comment 1 Ivo Sarak 2004-06-04 13:15:08 UTC Another box with the same type of MB, but running FC1(kernel-2.4.22-1.2188.nptl) is giving the same error.MB in question is EpoX 8HDA3+.# lspci00:00.0 Host bridge: VIA Technologies, Inc. VT8385 [K8T800 AGP] HostBridge (rev 01)00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800South]00:08.0 Ethernet controller: 3Com Corporation 3c940 1000Base? (rev 12)00:0a.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado](rev 78)00:0b.0 PCI bridge: Distributed Processing Technology PCI Bridge (rev 02)00:0b.1 I2O: Distributed Processing Technology SmartRAID V Controller(rev 02)00:0e.0 RAID bus controller: CMD Technology Inc: Unknown device 3114(rev 02)00:0f.0 IDE interface: VIA Technologies, Inc.VT82C586A/B/VT82C686/A/B/VT823x/A/C/VT8235 PIPC Bus Master IDE (rev 06)00:10.0 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0controller] (rev 81)00:10.1 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0controller] (rev 81)00:10.2 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0controller] (rev 81)00:10.3 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0controller] (rev 81)00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [K8T800South]00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128 ProUltra TF# dmidecode 2.2SMBIOS 2.2 present.40 structures occupying 1084 bytes.Table at 0x000F0000.Handle 0x0000 DMI type 0, 19 bytes. BIOS Information Vendor: Phoenix Technologies, LTD Version: 6.00 PG Release Date: 12/02/2003 Address: 0xE0000 Runtime Size: 128 kB ROM Size: 512 kB Characteristics: ISA is supported PCI is supported PNP is supported APM is supported BIOS is upgradeable BIOS shadowing is allowed Boot from CD is supported Selectable boot is supported BIOS ROM is socketed EDD is supported 5.25"/360 KB floppy services are supported(int 13h) 5.25"/1.2 MB floppy services are supported(int 13h) 3.5"/720 KB floppy services are supported (int13h) 3.5"/2.88 MB floppy services are supported(int 13h) Print screen service is supported (int 5h) 8042 keyboard services are supported (int 9h) Serial services are supported (int 14h) Printer services are supported (int 17h) CGA/mono video services are supported (int 10h) ACPI is supported USB legacy is supported AGP is supported LS-120 boot is supported ATAPI Zip drive boot is supportedHandle 0x0001 DMI type 1, 25 bytes. System Information Manufacturer: Product Name: Version: Serial Number: UUID: Not Present Wake-up Type: Power SwitchHandle 0x0002 DMI type 177, 69 bytes. OEM-specific Type Header And Data: B1 45 02 00 00 04 61 52 F6 29 01 00 02 01 06 11 65 30 06 11 1F 10 00 00 00 00 03 08 09 0E 03 00 40 02 73 31 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 Strings: VIA3177-MACHandle 0x0003 DMI type 2, 8 bytes. Base Board Information Manufacturer: Product Name: K8T800-8237 Version: Serial Number:Handle 0x0004 DMI type 3, 13 bytes. Chassis Information Manufacturer: Type: Desktop Lock: Not Present Version: Serial Number: Asset Tag: Boot-up State: Unknown Power Supply State: Unknown Thermal State: Unknown Security Status: UnknownHandle 0x0005 DMI type 4, 32 bytes. Processor Information Socket Designation: Socket A Type: Central Processor Family: Duron Manufacturer: AMD ID: 48 0F 00 00 FF FB 8B 07 Signature: Type 0, Family F, Model 4, Stepping 8 Flags: FPU (Floating-point unit on-chip) VME (Virtual mode extension) DE (Debugging extension) PSE (Page size extension) TSC (Time stamp counter) MSR (Model specific registers) PAE (Physical address extension) MCE (Machine check exception) CX8 (CMPXCHG8 instruction supported) APIC (On-chip APIC hardware supported) SEP (Fast system call) MTRR (Memory type range registers) PGE (Page global enable) MCA (Machine check architecture) CMOV (Conditional move instruction supported) PAT (Page attribute table) PSE-36 (36-bit page size extension) CLFSH (CLFLUSH instruction supported) MMX (MMX technology supported) FXSR (Fast floating-point save and restore) SSE (Streaming SIMD extensions) SSE2 (Streaming SIMD extensions 2) Version: AMD Athlon(tm) 64 Processor 3000+ Voltage: 1.5 V External Clock: 202 MHz Max Speed: 1500 MHz Current Speed: 2020 MHz Status: Populated, Enabled Upgrade: ZIF Socket L1 Cache Handle: 0x000B L2 Cache Handle: 0x000C L3 Cache Handle: No L3 CacheHandle 0x0006 DMI type 5, 24 bytes. Memory Controller Information Error Detecting Method: 64-bit ECC Error Correcting Capabilities: None Supported Interleave: One-way Interleave Current Interleave: One-way Interleave Maximum Memory Module Size: 32 MB Maximum Total Memory Size: 128 MB Supported Speeds: 70 ns 60 ns Supported Memory Types: Standard EDO Memory Module Voltage: 5.0 V Associated Memory Slots: 4 0x0007 0x0008 0x0009 0x000A Enabled Error Correcting Capabilities: NoneHandle 0x0007 DMI type 6, 12 bytes. Memory Module Information Socket Designation: A0 Bank Connections: 0 1 Current Speed: 10 ns Type: Other Installed Size: 512 MB (Double-bank Connection) Enabled Size: 512 MB (Double-bank Connection) Error Status: OKHandle 0x0008 DMI type 6, 12 bytes. Memory Module Information Socket Designation: A1 Bank Connections: None Current Speed: 10 ns Type: Other Installed Size: Not Installed (Single-bank Connection) Enabled Size: Not Installed (Single-bank Connection) Error Status: OKHandle 0x0009 DMI type 6, 12 bytes. Memory Module Information Socket Designation: A2 Bank Connections: None Current Speed: 10 ns Type: Other Installed Size: Not Installed (Single-bank Connection) Enabled Size: Not Installed (Single-bank Connection) Error Status: OKHandle 0x000A DMI type 6, 12 bytes. Memory Module Information Socket Designation: A3 Bank Connections: None Current Speed: 10 ns Type: Other Installed Size: Not Installed (Single-bank Connection) Enabled Size: Not Installed (Single-bank Connection) Error Status: OKHandle 0x000B DMI type 7, 19 bytes. Cache Information Socket Designation: Internal Cache Configuration: Enabled, Not Socketed, Level 1 Operational Mode: Write Back Location: Internal Installed Size: 128 KB Maximum Size: 128 KB Supported SRAM Types: Synchronous Installed SRAM Type: Synchronous Speed: Unknown Error Correction Type: Unknown System Type: Unknown Associativity: UnknownHandle 0x000C DMI type 7, 19 bytes. Cache Information Socket Designation: External Cache Configuration: Enabled, Not Socketed, Level 2 Operational Mode: Write Back Location: Internal Installed Size: 512 KB Maximum Size: 512 KB Supported SRAM Types: Synchronous Installed SRAM Type: Synchronous Speed: Unknown Error Correction Type: Unknown System Type: Unknown Associativity: UnknownHandle 0x000D DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: PRIMARY IDE Internal Connector Type: On Board IDE External Reference Designator: Not Specified External Connector Type: None Port Type: OtherHandle 0x000E DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: SECONDARY IDE Internal Connector Type: On Board IDE External Reference Designator: Not Specified External Connector Type: None Port Type: OtherHandle 0x000F DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: FDD Internal Connector Type: On Board Floppy External Reference Designator: Not Specified External Connector Type: None Port Type: 8251 FIFO CompatibleHandle 0x0010 DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: COM1 Internal Connector Type: 9 Pin Dual Inline (pin 10 cut) External Reference Designator: External Connector Type: DB-9 male Port Type: Serial Port 16450 CompatibleHandle 0x0011 DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: COM2 Internal Connector Type: 9 Pin Dual Inline (pin 10 cut) External Reference Designator: External Connector Type: DB-9 male Port Type: Serial Port 16450 CompatibleHandle 0x0012 DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: LPT1 Internal Connector Type: DB-25 female External Reference Designator: External Connector Type: DB-25 female Port Type: Parallel Port ECP/EPPHandle 0x0013 DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: Keyboard Internal Connector Type: PS/2 External Reference Designator: External Connector Type: PS/2 Port Type: Keyboard PortHandle 0x0014 DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: PS/2 Mouse Internal Connector Type: PS/2 External Reference Designator: External Connector Type: PS/2 Port Type: Mouse PortHandle 0x0015 DMI type 8, 9 bytes. Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: USB0 External Connector Type: Other Port Type: USBHandle 0x0016 DMI type 9, 13 bytes. System Slot Information Designation: PCI0 Type: 32-bit PCI Current Usage: In Use Length: Long ID: 1 Characteristics: 5.0 V is provided PME signal is supportedHandle 0x0017 DMI type 9, 13 bytes. System Slot Information Designation: PCI1 Type: 32-bit PCI Current Usage: Available Length: Long ID: 2 Characteristics: 5.0 V is provided PME signal is supportedHandle 0x0018 DMI type 9, 13 bytes. System Slot Information Designation: PCI2 Type: 32-bit PCI Current Usage: In Use Length: Long ID: 3 Characteristics: 5.0 V is provided PME signal is supportedHandle 0x0019 DMI type 9, 13 bytes. System Slot Information Designation: PCI3 Type: 32-bit PCI Current Usage: In Use Length: Long ID: 4 Characteristics: 5.0 V is provided PME signal is supportedHandle 0x001A DMI type 9, 13 bytes. System Slot Information Designation: AGP Type: 32-bit AGP Current Usage: Available Length: Long ID: 8 Characteristics: 5.0 V is providedHandle 0x001B DMI type 13, 22 bytes. BIOS Language Information Installable Languages: 3 n|US|iso8859-1 n|US|iso8859-1 r|CA|iso8859-1 Currently Installed Language: n|US|iso8859-1Handle 0x001C DMI type 16, 15 bytes. Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: None Maximum Capacity: 2 GB Error Information Handle: Not Provided Number Of Devices: 4Handle 0x001D DMI type 17, 21 bytes. Memory Device Array Handle: 0x001C Error Information Handle: Not Provided Total Width: Unknown Data Width: Unknown Size: 512 MB Form Factor: DIMM Set: None Locator: A0 Bank Locator: Bank0/1 Type: Unknown Type Detail: NoneHandle 0x001E DMI type 17, 21 bytes. Memory Device Array Handle: 0x001C Error Information Handle: Not Provided Total Width: Unknown Data Width: Unknown Size: No Module Installed Form Factor: DIMM Set: None Locator: A1 Bank Locator: Bank2/3 Type: Unknown Type Detail: NoneHandle 0x001F DMI type 17, 21 bytes. Memory Device Array Handle: 0x001C Error Information Handle: Not Provided Total Width: Unknown Data Width: Unknown Size: No Module Installed Form Factor: DIMM Set: None Locator: A2 Bank Locator: Bank4/5 Type: Unknown Type Detail: NoneHandle 0x0020 DMI type 17, 21 bytes. Memory Device Array Handle: 0x001C Error Information Handle: Not Provided Total Width: Unknown Data Width: Unknown Size: No Module Installed Form Factor: DIMM Set: None Locator: A3 Bank Locator: Bank6/7 Type: Unknown Type Detail: NoneHandle 0x0021 DMI type 19, 15 bytes. Memory Array Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0001FFFFFFF Range Size: 512 MB Physical Array Handle: 0x001C Partition Width: 0Handle 0x0022 DMI type 20, 19 bytes. Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0001FFFFFFF Range Size: 512 MB Physical Device Handle: 0x001D Memory Array Mapped Address Handle: 0x0021 Partition Row Position: 1Handle 0x0023 DMI type 20, 19 bytes. Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x000000003FF Range Size: 1 kB Physical Device Handle: 0x001E Memory Array Mapped Address Handle: 0x0021 Partition Row Position: 1Handle 0x0024 DMI type 20, 19 bytes. Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x000000003FF Range Size: 1 kB Physical Device Handle: 0x001F Memory Array Mapped Address Handle: 0x0021 Partition Row Position: 1Handle 0x0025 DMI type 20, 19 bytes. Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x000000003FF Range Size: 1 kB Physical Device Handle: 0x0020 Memory Array Mapped Address Handle: 0x0021 Partition Row Position: 1Handle 0x0026 DMI type 32, 11 bytes. System Boot Information Status: No errors detectedHandle 0x0027 DMI type 127, 4 bytes. End Of Table Comment 2 Ivo Sarak 2004-06-16 13:28:12 UTC With kernel-2.6.6-1.427 there are no such messages anymore. Comment 3 Jon Bianca 2005-04-01 17:18:55 UTC I'm seeing this message with FC3 (kernel 2.6.9-1.667) Comment 4 Tim 2005-04-19 23:44:29 UTC Also being seen with FC4 Test2 (kernel 2.6.11-1.1226) Comment 5 Nicolas Corrarello 2005-07-21 14:19:42 UTC This can be circumvented (if using hotplug) by adding uhci_hcd to/etc/hotplug/blacklist. Of course, if the module is loaded, problem will appearsagain.It is possible to filter the messages by adding switch "-c 2" to kernel loggingdaemon. Just edit /etc/init.d/klogd:ChangeKLOGD=""toKLOGD="-c 2"Unfortunately this filters also many other useful kernel messages. Comment 6 Dave Jones 2006-10-16 20:03:30 UTC A new kernel update has been released (Version: 2.6.18-1.2200.fc5)based upon a new upstream kernel release.Please retest against this new kernel, as a large number of patchesgo into each upstream release, possibly including changes thatmay address this problem.This bug has been placed in NEEDINFO state.Due to the large volume of inactive bugs in bugzilla, if this bug isstill in this state in two weeks time, it will be closed.Should this bug still be relevant after this period, the reportercan reopen the bug at any time. Any other users on the Cc: listof this bug can request that the bug be reopened by adding acomment to the bug.In the last few updates, some users upgrading from FC4->FC5have reported that installing a kernel update has left theirsystems unbootable. If you have been affected by this problemplease check you only have one version of device-mapper & lvm2installed. See bug 207474 for further details.If this bug is a problem preventing you from installing therelease this version is filed against, please see bug 169613.If this bug has been fixed, but you are now experiencing a differentproblem, please file a separate bug for the new problem.Thank you. Comment 7 Jon Stanley 2008-01-20 04:36:43 UTC (this is a mass-close to kernel bugs in NEEDINFO state)As indicated previously there has been no update on the progress of this bugtherefore I am closing it as INSUFFICIENT_DATA. Please re-open if the issuestill occurs for you and I will try to assist in its resolution. Thank you fortaking the time to report the initial bug.If you believe that this bug was closed in error, please feel free to reopenthis bug. |
